收藏本站
W9816G6IH
7.17 Power Down Mode
The Power Down mode is initiated by holding CKE low. All of the receiver circuits except CKE are
gated off to reduce the power. The Power Down mode does not perform any refresh operations;
therefore the device can not remain in Power Down mode longer than the Refresh period (t REF ) of the
device.
The Power Down mode is exited by bringing CKE high. When CKE goes high, a No Operation
Command is required on the next rising clock edge, depending on t CK . The input buffers need to be
enabled with CKE held high for a period equal to t CKS (min) + t CK (min).
7.18 No Operation Command
The No Operation Command should be used in cases when the SDRAM is in an idle or a wait state to
prevent the SDRAM from registering any unwanted commands between operations. A No Operation
Command is registered when CS is low with RAS , CAS and WE held high at the rising edge of
the clock. A No Operation Command will not terminate a previous operation that is still executing,
such as a burst read or write cycle.
7.19 Deselect Command
The Deselect Command performs the same function as a No Operation Command. Deselect
Command occurs when CS is brought high, the RAS , CAS and WE signals become don't cares.
7.20 Clock Suspend Mode
During normal access mode, CKE must be held high enabling the clock. When CKE is registered low
while at least one of the banks is active, Clock Suspend Mode is entered. The Clock Suspend mode
deactivates the internal clock and suspends any clocked operation that was currently being executed.
There is a one-clock delay between the registration of CKE low and the time at which the SDRAM
operation suspends. While in Clock Suspend mode, the SDRAM ignores any new commands that are
issued. The Clock Suspend mode is exited by bringing CKE high. There is a one-clock cycle delay
from when CKE returns high to when Clock Suspend mode is exited.
Publication Release Date: Mar. 22, 2010
- 11 -
Revision A02
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
W9825G6JH-6I IC SDRAM 256MBIT 54TSOPII
W9864G6JH-6I IC SDRAM 64MBIT 54TSOPII
WM-5614 CABINET WALL MOUNT 37.25X17.9"
WRR-2244 RACK WALL MOUNT RELAY 42" X 19"
WRR-2264 RACK WALL MOUNT 75.25" X 19"
X28C512JIZ-12 IC EEPROM 512KBIT 120NS 32PLCC
X28HC256SIZ-90 IC EEPROM 256KBIT 90NS 28SOIC
X28HC64JIZ-90 IC EEPROM 64KBIT 90NS 32PLCC
相关代理商/技术参数
W9816G6IH-7 制造商:WINBOND 制造商全称:Winbond 功能描述:512K 】 2 BANKS 】 16 BITS SDRAM
W9816G6IH-7I 制造商:WINBOND 制造商全称:Winbond 功能描述:512K 】 2 BANKS 】 16 BITS SDRAM
W982504AH-7 制造商:未知厂家 制造商全称:未知厂家 功能描述:x4 SDRAM
W982504AH-75 制造商:未知厂家 制造商全称:未知厂家 功能描述:x4 SDRAM
W982504AH-8H 制造商:未知厂家 制造商全称:未知厂家 功能描述:x4 SDRAM
W982508AH 制造商:WINBOND 制造商全称:Winbond 功能描述:8M X 4 BANKS X 8 BIT SDRAM
W982508AH-7 制造商:未知厂家 制造商全称:未知厂家 功能描述:x8 SDRAM
W982508AH-75 制造商:未知厂家 制造商全称:未知厂家 功能描述:x8 SDRAM